Steps to Improve Cutting Performance with Tristate Knife Grinding

Cutting requires the foundation of a quality control process. Without it, mistakes can happen that jeopardize the blade sharpening result. Apart from your skill level and technique, factors like choosing the correct grinder blades and using them properly affect cutting performance with Tristate knife grinding.

Steps to Improve Cutting Performance with Tristate Knife Grinding

#1 Select the Accurate Wheel Thickness

If you pick cutting wheels with a thinner face, it will cut faster and smoother. If you choose the thicker ones, they will cut slower but last longer while cutting hard or thick workpieces. It also increases friction and heat due to more surface contact. If you use a thinner wheel to cut thicker material, the heat and friction will impact the wheel's life and durability.

#2 Clamp the Workpiece Properly and Securely

When you fail to clamp the workpiece securely, it moves and slides around while cutting. Orient your clamps depending on your preference and comfort. Avoid doing it far away from the cut line of the workpiece. It results in damaging the wheels due to higher vibrations.

#3 Approach From Precise Angle

The design of cutting wheels allows making straight, in-line cuts. So, use it at a 90-degree angle perpendicular to the work surface to avoid binding, especially while using a thinner wheel. Position your body ergonomically to see the wheel entering the cut line. Always enter the cut from the point of least resistance while blade sharpening. Enter from the sharp corner for the lowest surface contact to start when cutting corners or square profiles.

#4 Use Motion Through the Cut

While performing blade sharpening service, use sliding or rocking motion in the direction of the cut. Move the wheel into and through the workpiece instead of straight down. Downward pressure can dull your blade much faster compared to a slicing motion. Let the wheel pull itself through the workpiece instead of trying to force it through. It minimizes friction and force and improves the cutting performance.

#5 Avoid Pushing too Hard

Pressure and heat are enemies of blade sharpening and abrasive cutting products. It's a common human error to push hard to improve cutting performance. But it only builds heat and friction that damages the wheels. So instead, allow the blade sharpening wheel to do all the work as possible in the cut.

#6 Follow the Direction of the Rotation

Every grinder blade contains a directional arrow mark on its head that indicates the direction of the wheel rotation. You must orient the cutting wheel like it rotates and pulls itself into the workpiece instead of turning away from it to improve the cutting performance. It's a safety hazard if it rotates away from the workpiece. Stop and access the problem with your wheel if you hear the RPMs drop.

Conclusion

Choose the right cutting wheel and follow the steps to improve cutting performance. If you lack in skill level, hire professional sharpening services for the job.

Comments

Popular posts from this blog

Most Crucial Points to Think About Before Hiring a Knife Sharpening Service

Best Technique to Sharpen a Knife

5 Best Way to Sharpen a Knife